- The Blade
The SnowStorm Blade is designed specifically to
take the abuse from mid-sized wheel loaders. Even
under down pressure. From the channel - reinforced moldboard,
to the 1.75" 1045 greaseable King Pin, this plow is designed for
the serious snow professional.
The Blade features a 9” trip
edge tripping back a full 90 deg.
Hidden obstacles like curbs
are hardly even felt by the
Cutting edges have a standard "Highway punch" bolt pattern.
They are not "custom" to our plow, so they are available
at most cutting edge suppliers.
12 Degrees of free floating oscillation allows
the cutting edge to follow the contour of the plowing surface.
Oscillation plate pivots
on (6) 1” grade 8 bolts. The plate is
mounted on the moldboard itself to reduce the
effective strain while applying down pressure.
(2) 3” bore hydraulic cylinders
power the plow left and right
Steps in Powder Coating:
First, The Blade is thoroughly sandblasted. Sandblasting is crucial for maximum finish life.
Second, seam sealer is applied to all unwelded joints to prevent rust pockets and rust streaks.
Third, The Blade is washed, primed with epoxy primer and topcoated with a premium powder coat.
Finally, the finish is baked on at 400+ degrees F. You can be sure; nothing is better.
The Kage System requires two sets of auxiliary hydraulics.
If only one set is available from the loader, this optional
electric over hydraulic may be used to operate the