Wing skids play an important role in the performance of hydraulic wing plows. They help maintain proper ground contact and protect critical components from excessive wear. But like snow plow cutting edges, wing skids are wear items that eventually need to be replaced.
Knowing when to replace wing skids on your KAGE SnowFire, SnowStorm, or SnowDozer Wing plow can help prevent unnecessary damage, maintain consistent scraping performance, and reduce equipment downtime.
In this guide, we’ll explain how much wear is acceptable on KAGE wing skids, when they should be replaced, and how to identify excessive wear before it causes problems.
Why Wing Skid Wear Matters
KAGE hydraulic wing plows feature floating wings designed to follow uneven surfaces. The heel-and-toe float system allows the wings to adjust independently, helping maintain consistent contact with the pavement and avoiding excessive pressure.
Wing skids are an important part of this system. As they wear down, the wings’ ground contact can change.
Excessively worn wing skids can lead to:
- Reduced ground contact and inconsistent scraping performance
- Increased wear on surrounding components
- Unnecessary maintenance costs and equipment downtime
The key is to replace wing skids before their supporting components begin contacting the pavement.
KAGE Wing Skid Replacement Chart
Different KAGE Wing plows use different skid materials, dimensions, and wear limits. Use the following chart as a quick reference.
| KAGE Wing Plow | New Skid Height | Approx. Usable Wear | Replace At |
|---|---|---|---|
| SnowFire Wing (Poly) | 8″ | 3-1/2″ | 4-1/2″ |
| SnowStorm Wing (AR400 Steel) | 9″ | 2″ | 7″ |
| SnowStorm TukR Wing (Hardox AdvantEDGE) | 9″ | 3-1/2″ | 5-1/2″ |
| SnowDozer 4′ or 5′ Wing (AR400 Steel) | 9″ | 2″ | 7″ |
| SnowDozer TukR Wing (Hardox AdvantEDGE) | 9″ | 3-1/2″ | 5-1/2″ |
Important: These replacement measurements are based on remaining skid height, not the amount of material removed. Replace skids sooner if they no longer contact the ground properly.
When to Replace SnowFire Wing Skids
Original Height: 8 inches | Material: Polyurethane (Poly) | Replace at: 4-1/2 inches
KAGE SnowFire Wing plows use 8-inch-tall poly wing skids designed to provide ground support while reducing the risk of surface damage.
These skids have approximately 3-15/16 inches of potential wear before reaching the blue poly skid support. However, replacement is recommended when their remaining height reaches 4-1/2 inches.
This provides a safety margin before the skid support becomes exposed to pavement contact.
SnowFire Wing Skid Replacement Indicators
- Remaining skid height measures 4-1/2 inches or less.
- The wing skid no longer makes proper contact with the ground.
- The blue poly skid support is approaching the pavement.
Don’t wait until the blue skid support begins scraping against the ground. Replacing the poly skid at the recommended height helps protect the support and maintain proper wing operation.
When to Replace SnowStorm Wing Skids
Original Height: 9 inches | Material: AR400 Steel | Replace at: Approximately 7 inches
Standard KAGE SnowStorm Wing plows use heavy-duty, 9-inch-tall AR400 steel wing skids.
These skids have approximately 2-1/2 inches of potential wear before reaching the first bolt on the curb guard. However, the recommended replacement point is approximately 7 inches of remaining height, or about 2 inches of material worn away.
This replacement threshold helps prevent the mounting hardware from being exposed to excessive pavement contact.
SnowStorm Wing Skid Replacement Indicators
- Remaining skid height is approximately 7 inches.
- The skid no longer maintains proper ground contact.
- Wear is approaching the lower curb guard mounting hardware.
Although AR400 steel offers excellent abrasion resistance, these skids should still be inspected regularly throughout the snow removal season.
When to Replace SnowStorm TukR Wing Skids
Original Height: 9 inches | Material: Hardox Steel | Replace at: Approximately 5-1/2 inches
The KAGE SnowStorm TukR Wing features a specialized design with extra reach for clearing snow beneath trailer tongues and other low-clearance obstacles.
Its wing skids use 9-inch-tall Hardox AdvantEDGE wear components, offering increased usable wear compared to the standard SnowStorm steel wing skids.
These skids have approximately 4 inches of potential wear before reaching the supporting segment. KAGE recommends replacing them when their remaining height reaches approximately 5-1/2 inches. (Note: This is more useable wear than when an AdvantEDGE cutting edge is used on the moldboard of a plow.)
Why the AdvantEDGE on TukR Wing Skids Have More Usable Wear
One important difference is the angle at which the wear components contact the ground.
On the TukR Wing, the wing skid is positioned vertically. By comparison, a cutting edge on the center moldboard operates at approximately a 65-degree attack angle.
Because the center cutting edge is angled, its supporting structure sits closer to the ground, limiting how much of the cutting edge can wear away before the support becomes vulnerable.
The vertically-positioned TukR Wing skid allows more of its height to be used before reaching the supporting segment.
This means TukR Wing skids can provide approximately 3-1/2 inches of usable wear before replacement, compared to approximately 2 inches on standard AR400 SnowStorm Wing skids and the standard 2 inches of usable wear for AdvantEDGE cutting edges on center sections of the same plow.
SnowStorm TukR Wing Skid Replacement Indicators
- Remaining skid height reaches approximately 5-1/2 inches.
- The skid no longer makes proper contact with the ground.
- Wear is approaching the supporting segment.
When to Replace SnowDozer Wing Skids
KAGE SnowDozer Wing plows use the same wing skid replacement guidelines as their corresponding SnowStorm Wing configurations.
Standard SnowDozer Wings (4′ and 5′)
The 4-foot and 5-foot SnowDozer Wings use the same skid design as the standard 4-foot SnowStorm Wing.
- Material: AR400 steel
- Original height: 9 inches
- Replacement height: Approximately 7 inches
- Usable wear: Approximately 2 inches
Replace these skids when they reach approximately 7 inches tall or no longer maintain proper ground contact.
SnowDozer TukR Wing (8.5′)
The 8.5-foot SnowDozer TukR Wing uses the same skid configuration as the 6.5-foot SnowStorm TukR Wing.
- Material: Hardox Steel
- Original height: 9 inches
- Replacement height: Approximately 5-1/2 inches
- Usable wear: Approximately 3-1/2 inches
These skids should be replaced when they reach approximately 5-1/2 inches tall or lose proper ground contact.
How to Inspect Wing Skids for Wear
Regular inspections are one of the easiest ways to avoid premature damage to your wing plow.
Follow these steps when checking wing skid wear:
- Park on a level surface. Lower the plow safely and follow the equipment’s shutdown procedures before inspecting.
- Measure the remaining skid height. Compare the measurement to the replacement specifications for your KAGE Wing plow.
- Inspect both wing skids. Check for uneven wear, damage, or differences in remaining height.
- Examine surrounding components. Look for wear on skid supports, curb guards, mounting bolts, and other nearby hardware.
- Check ground contact. Verify that the wing skids can maintain proper contact with the pavement during normal operation.
Remember that skid height isn’t the only factor determining when replacement is necessary.
If a wing skid no longer contacts the ground properly, it should be replaced even if it hasn’t reached its minimum recommended height.
Can You Keep Using Wing Skids Past Their Recommended Replacement Height?
Although some wing skids have additional material between their recommended replacement height and the supporting hardware, continuing to use them beyond that point increases the risk of damage.
For example, a standard SnowStorm Wing skid has approximately 2-1/2 inches of potential wear before reaching the first curb guard bolt. However, its recommended replacement point is after approximately 2 inches of wear.
That remaining margin helps protect surrounding components.
The cost of replacing a worn skid is generally much less than the cost of repairing damaged supports, mounting hardware, or other plow components.
Keep Your KAGE Wing Plow Performing at Its Best
Whether you’re operating a SnowFire Wing on a skid steer, compact wheel loader or compact tractor, a SnowStorm Wing on a midsize wheel loader or ag tractor, or a SnowDozer Wing on a large wheel loader, monitoring skid wear is an important part of routine snow plow maintenance.
The most important replacement measurements to remember are:
- SnowFire Wing: Replace at 4-1/2 inches.
- SnowStorm Wing: Replace at approximately 7 inches.
- SnowStorm TukR Wing: Replace at approximately 5-1/2 inches.
- SnowDozer Wing: Replace at approximately 7 inches
- SnowDozer TukR Wing: Replace at approximately 5-1/2 inches.
And regardless of the model, replace wing skids whenever they can no longer maintain proper ground contact.
Routine inspections and timely replacement help protect your investment, maintain effective scraping performance, and keep your snow removal equipment ready for the next storm.
For replacement wing skids and other genuine KAGE snow plow parts, visit shop.kageinnovation.com.





Recent Comments